KNOWLED™-GODOX Photo Equipment Co.,Ltd.

M600Bi Firmware V1.02

Release Date

2024/10/25

Remark

1.Please copy the firmware file to the root directory of the USB drive. The USB drive must be formatted to FAT32, and only one firmware (bin file) should exist in the root directory at a time.
2.Insert the USB drive into the USB port on the light and turn on the light. Wait for the upgrade progress bar to complete.

Updated Contents

1.DMX channel definition modification: The first channel is changed to brightness.

M600Bi Firmware V1.1

Release Date

2023/04/08

Remark

Please download the latest firmware (Bin file) of M600Bi from the official website and put it into the main directory of U disk. Then connect the U disk to the USB interface of M600Bi control box.

Updated Contents

1.USB port can provide 5V voltage and 500ma current.

2.Shortly pressing the shutdown button, the light can be turned on and off quickly.

3.DMX is modified to 6 modes:

(1). CCT_8bit

(2). FX_8bit

(3). CCT _16bit

(4). FX_16bit

(5). ULTIMATE_8bit

(6). ULTIMATE _16bit

M600D Firmware V1.07

Release Date

2024/10/25

Remark

1.Please copy the firmware file to the root directory of the USB drive. The USB drive must be formatted to FAT32, and only one firmware (bin file) should exist in the root directory at a time.
2.Insert the USB drive into the USB port on the light and turn on the light. Wait for the upgrade progress bar to complete.

Updated Contents

1.DMX channel definition modification: The first channel is changed to brightness.

M1000R Firmware V1.01

Release Date

2025/12/20

Remark

1.Please use a USB flash drive to copy the firmware to the root directory and the U disk needs to be in FAT32 format. At the same time, only one firmware (bin format) can exist in the root directory.
2.Insert the USB flash drive into the USB port of the light, and turn on the light. Wait for the upgrade progress bar to complete.

Updated Contents

Optimize known issues

MG4KR Firmware V1.03

Release Date

2025/12/26

Remark

1.Please use a USB flash drive to copy the firmware to the root directory and the U disk needs to be in FAT32 format. At the same time, only one firmware (bin format) can exist in the root directory.
2.Insert the USB flash drive into the USB port of the light, and turn on the light. Wait for the upgrade progress bar to complete.

Updated Contents

New function for motorized accessories control and optimized accessory compatibility